Chuck Levin's is an authorized dealer of American DJ

Chuck Levin's is an authorized dealer of American DJ

American DJ Monster Beam

    About American DJ Monster Beam 

    The American DJ Monster Beam is a high output Moonflower effect that produces very thick beams of light powered by 25x 1-Watt LEDs (5x Red, 5x Green, 5x Blue, 5x Amber and 5x White). This fixture has exciting built-in lighting shows, or users can run the effect in sound active or DMX mode. 

    The American DJ Monster Beam has a 4-button DMX LCD display on the rear panel to help user easily navigate through the built-in features. This fixture provides DMX and power linking on the rear panel, a hanging yoke  to attach the fixture to truss, and a  safety loop to secure the fixture with safety cable as a secondary precaution. 

    The American DJ Monster Beam is compatible with the easy-to-use UC3 hand-held controller, has a wide 29-degree beam angle and only draws 40W maximum power.

    American DJ Monster Beam Specifications:

    LED DMX Moonflower with very thick Red, Green, Blue, Amber & White Beams
    3 Operational modes: Sound Active, Show (Auto Program Run), & DMX Controlled
    1 DMX Channel
    Built-In Light Show Programs
    Wide beam spread covers a large area
    Beam angle: 29 degrees
    Flicker Free
    Linkable via 3-pin XLR cable
    4-button DMX LCD display on rear panel
    AC outlet on side to daisy chain power (up to 7 Monster Beam’s @ 120V and 12 Monster Beam’s @ 230V)
    Compatible with American DJ UC3 Series easy-to-use controllers (sold Separately)
    Strobe effect (Using UC3 Controller)
    Includes single yoke to mount on a wall or from trussing bracket
    Safety Loop on rear panel
    Long life LEDs (Rated at approximately 50,000 hrs.)
    Light Source: 25 x 1W total LEDs : 5 Red, 5 Green, 5 Blue, 5 Amber and 5 White 
    Multi-voltage: 100-240V, 50/60Hz
    Power Draw: 40W max
    Dimensions (LxWxH): 12.5” x 10” x 8.25” / 213 x 254 x 207mm
    Weight: 8 lbs. / 3.3 kg.
     
    WARNING CONCERNING DIRECT SUNLIGHT CONTACT!? Due to the magnifying type lens, please keep the lens out of contact with direct sunlight. Direct sunlight can cause heat to build up inside of the unit, which will seriously damage unit.