Chuck Levin's is an authorized dealer of Audio Engineering Associates

Chuck Levin's is an authorized dealer of Audio Engineering Associates

AEA R84 Big Ribbon Studio Microphone

    About the AEA R84 Big Ribbon Studio Microphone

    The AEA R84 is a passive ribbon microphone that shares many of the unique sound characteristics with its historic predecessor, the R44. Using everything Wes Dooley and the team here at AEA had learned by re-creating the RCA 44, we went back to the drawing board to create something completely new. Call it a Swiss army knife, your “desert island mic”, or simply “The Workhorse” - the AEA R84 was designed to be flexible and practical in a myriad of recording settings. With the improvements in technology and manufacturing since the thirties and forties, we decided to re-engineer the entire package to be more efficient, lighter and less expensive, inspiring Wes to affectionately call the AEA R84 the “R44 for us married guys”. The result is a new microphone with a classic sound. The AEA R84 produces rich and full low-mids, a smooth top end, and has a well-behaved bidirectional pickup pattern. These aspects, combined with the reduced proximity effect, make the AEA R84 incredibly well-suited for both close-up and ambient mic applications in medium sized rooms. It’s just as versatile as an R44, flattering voice, strings, brass and drums alike.

    The AEA R84 uses a big, 2.35" by 0.185" by 2 micron pure aluminum low-tension ribbon element just like the classic R44. Many ribbon mic manufacturers choose shorter ribbons that are easier to install, but AEA’s Large Ribbon Geometry TM design offers important advantages. Ribbon microphones operate linearly above their resonant frequency, unlike condenser or moving-coil transducers, so the resonant frequency of a good microphone design should be as low as possible. The longer the ribbon, the lower the resonant frequency will be. The ribbon has to move twice as far for every drop in octave as it vibrates within the magnetic gap, thus a longer ribbon will allow for further movement back and forth. This results in the ribbon handling louder sound sources and more sound pressure level (SPL). Most AEA ribbons are tuned to 16.5 Hz, and because the R84 shares the same Big Ribbon™ as the rest of AEA's product line, you will achieve a sound that is smooth, natural and free from any of the uncomfortable resonances that shorter ribbons and condensers can exhibit. The result is a sound that many engineers say is astonishingly close to what their ears hear when you're actually standing in the studio.

    AEA R84 Specifications:

    Operating Principle: Pressure gradient microphone

    Directional Pattern: Bidirectional (Figure-of-8)

    Frequency Range: 20 Hz to 20 kHz

    Maximum SPL: 165+ dBSPL (1% third harmonic > 1 kHz)

    Output Sensitivity: 2.5 mV/Pa (-52 dBv/Pa) into unloaded circuit

    Output Impedance: 270 Ω nominal

    Recommended Load Impedance: 1.2 kΩ or greater

    Powering: Not required or recommended

    Polarity: Pin 2 high for positive pressure on front of microphone.

    Connector: XLR-3M wired to a 3 m captive cable

    Off Axis Response:

    Polar Pattern: Native bi-directional pattern

    Horizontal: Level changes with angle, frequency response is consistent, –35 dB null at 90° / 270°

    Vertical: Level changes with angle, reduced HF response above and below 0° / 180° axis, –35 dB null at 90° / 270°

    Transducer element:

    Ribbon Thickness: 1.8 μ (0.0000018 m) of pure aluminum

    Ribbon Width: 0.185” (4.7 mm)

    Ribbon Length: 2.35” (59.7 mm)

    Accessories Included: 

    Custom storage / shipping case, manual


    Any length cable, inquire for price and delivery.

    Weight with Cable: 3 pounds (1.36 kg)

    Height: 11.6” (29.5 cm)

    Width: 3.9” (9.9 cm)

    Depth: 2.5” (6.4 cm)